Functions:
All operation process with voice prompt.
1.Both GSM and landline are available, full compliance with ADEMCO
contact ID, could send ADEMCO through GSM or telephone line...
2. Could set the sequencing of GSM dialing and local calls; The
sequencing of the short messages and the GSM dialing, or choose
whether use the message and GSM dialing,
3. The operation is very easy: Set the dialing number or revise the
number on the keyboard of the panel, edit the content of the
message in the mobile phone, and insert the GSM card to the panel.
4. 8 defense zone, exclusive zone 0 for key fob, each zone
programmable
5. 7-wire connection to any zone
6. Zone type inquiring and programming at random (Zone type:
Watchdog zone, exit/entry delay, 24 hours zone, sounder/silent when
alarming, armed/part armed zone, sensor/no sensor in the zone)
7.Three attributes are programmable for each detector, one
attribute is programmable for each Key Fob
Detector:
1 In the disarmed mode: Sounder when alarming once triggered: In
the armed mode: Dial the C. S. Number or users number
2 Doorbell function: Detector will be Door Bell when disarmed
3 Low voltage display: Panel can receive the detector low voltage
signal and display zone number and detector number on the LCD and
sound a beep
Key Fob: Key Fob Request assistance with no sounder
1,The Key Fob and detector logging in, without the need for coding
(user can add and reduce detectors freely, easy maintenance)
2,Multimode arming methods: Away arming, Part arming, 24 hour
arming, and every zone could be separately armed/disarmed)
3,85 event log about arming, disarming, and alarming (with time and
date stamp), viewable directly on the panel LCD
4,Built in TIMER IC, time precise and needs not adjusting even
after power failure
5,When alarming, the C. S operator or the user could listen in,
speak, or start the siren from a remote place
6, 6 time points of timed Auto-Arming, 6 time points of timed
Auto-disarming (24 hour mode)
7, Panel can receive the detector low voltage signal and display
zone number and detector number on the LCD and sound a beep
8,Line sensing and Alarm priority: Panel automatically check the
line and alarm even when it is engaged or cut.
9,Each detector could be set to Door Bell, when it is triggered,
the panel sound a ding-dong
10,Remotely arming/disarming, listen in, speak to the occupants
11,Entry/Exit delay, voice prompt both when arming and being
triggered
12,Mains Fail alarm. The panel will alarm when mains power fails
13,Siren could be set to sound when away arming
14,One touch feature: There are emergency button, medical help and
fire button on the keypad
15,Built-in high capacity rechargeable battery, auto
charge/discharge
16,Wireless signal transmitting test
17,Engineer Option. Listen to the dial tone of DTMF Voice message
Outstanding features:
1. Fully compatible with ADEMCO Contact ID format (Landline)
2.85 event log about arming, disarming, and alarming. When
alarming, the time, zone number and detector number could be
viewable on the LCD
3. Each zone programmable, e. G. Zone type programmable, you can
select one zone silent when alarming, select one key fob silent
when requiring assistance, set one zone a 24 hour zone, a zone
Entry/Exit delay, etc.
4. Each detector could be set to sounder when triggered, while not
transmit the signal to C. S. The doorbell function could be enabled
to any detector. 5 Panel can receive the detector low voltage
signal and display on the LCD and emits a beep to indicate user to
replace detector's battery in time.
